Archive for August, 2016

Eero – Features

Speed test

The IOS app has a built-in speed test that seems to use Internet connected servers under the control of Eero.  This appears to be a speed test from your gateway Eero to servers managed by Eero.  It doesn’t let you test your raw WiFi speed, which would be nice, so you can see exactly how good your coverage is from a given device at a given location.  So far, I’ve not been terribly impressed with their implementation of a speed test.  From my IOS device, connected to the Eero wifi network, I can run the Ookla speed test app, and get pretty much max speed from my Internet connection, but the results shown in the Eero IOS app are routinely much lower than my ISP actually provides.  I believe they are working to improve this.

Connected Devices

The IOS app gives you a nice list of Connected Devices, along with devices that were recently on your network.  You can see a nickname you’ve manually assigned for each device, or the hostname for some (such as Macs and IOS devices), along with a guess at who makes the device based upon the MAC address.  A downside here is that some devices use “Private” MAC addresses, which they aren’t supposed to do, making it harder to identify them.  It is nice that you can give them a Nickname once you figure out what they are, though.

Guest Network

I had the opportunity to try out the Guest Network feature this weekend.  The IOS app has a “Guest access” section.  Pop over there, hit a toggle switch to enable it, and you have a second SSID up and running, which is segmented from your normal network.  This is perfect for sharing network access with people who aren’t often at your home, and who you don’t want to have access to devices on your network – Just the Internet.  When you hit the “Share guest network” button, it brings up the familiar IOS interface so you can send it in an iMessage or an email.  In my case, I just looked at the pre-generated password and typed it in.  If you want to share your main network, there’s a button for that too.

Family Profiles

This is a feature I like, but it doesn’t do as much as I expected…  You can create a family profile for each of your kids and add their devices to their profile.  There’s a pause button next to each of them, allowing you to pause the Internet for each profile with a tap.  You can also set a schedule… The initial one defaults to the name “Bedtime”, which is 10 PM for my girls on school nights.  When a device is paused, if they attempt to browse to a website, they get a message indicating it’s paused, so they aren’t just left staring at a spinning icon, wondering why the website isn’t loading.  That probably only works for HTTP sites, but it’s a good start.

Another good use for this feature is to help identify devices.  Create a profile called “Unknown”, and place a single device that you’ve been unable to identify into that profile, then pause it.  At that point, look around and figure out what can’t access the Internet.

I really did hope for more with this feature, however.  When I read that Eero added “Family Profiles”, I think I expected content filtering.  The ability to set a content filter for each profile, so you can block your little ones (and yourself!) from bad things on the Internet.  Ideally, you’d be able to create your own customized list of categories to block with some sensible defaults, assign each Family Profile with a content filter profile, and have some way to see what is being blocked and by which profile.

I do understand that some companies don’t want to do content filtering.  No method is perfect, but having some method to guard against little Suzie ending up accidentally reaching a porn site would be a good thing.   A few years ago, if you went to show your kids the White House web page and, out of habit, went to “.com” instead of “.gov”, you might be surprised at the kind of site you reached.  Some level of content filtering would stop some accidents like that.

Why not get a dedicated content filtering device, like a Circle?

An Eero engineer on the reddit Eero forum basically warns against using a Circle with the Eero, due to the fact that it uses ARP poisoning to intercept traffic.  It sounds a bit on the messy side, and like it may not always catch everything.  I did read one customer who seemed to indicate it was working well for him, but I’m skeptical.

Perhaps they could partner with Circle?  Update their hardware to work something like Circle does…  The Eero would be the perfect place to control it.

Other Alternatives to Circle?

I do believe there are a few other devices that could be your Internet router, then run Eero in bridge mode, allowing the router to do all the filtering.  One that looks pretty good is the torch router, but at $249, it’s pricey, especially considering the money spent on the Eero system.  And the torch router includes Wifi, which we don’t really need with the Eero.

August 16, 2016 at 8:43 pm 1 comment

Eero – A few weeks in

I’ve been running with the Eero Wifi system in my home for a few weeks now.  I did have an issue where the IOS app stopped seeing devices as they connected and disconnected from my network.  Ultimately, I seemed to have fixed it, though I’m not entirely sure how.

My troubleshooting basically consisted of disconnecting the switches from each other and the power from all the Eeros, booting up my main Eero and waiting until it was online, then attaching each switch, one at a time, finally adding back the other Eeros.  That’s the basic idea at least.  I ended up taking a few switches out, as I didn’t need them with the improved WiFi coverage.

My network consisted of daisy-chained Ethernet switches…  Not the best design – It would have been better to have a central switch and home-run a CAT5 from each of the rooms to the central switch.

Anyhow, my network was basically like so:

Living Room: Two switches
Bed Room: Two switches
Den: Two switches

LR was linked to BR with a CAT5 cable, and BR was linked to the Den with a CAT5 cable.

Since each room now has a wire attached Eero access point, I took the step of removing a switch from the Bed Room and Den, giving me fewer overall hops.

Anyhow, I think this problem has been fixed now for a little over a week.

Other than that issue, which seems to be resolved now, it’s been pretty great in terms of WiFi coverage.

 

August 16, 2016 at 7:49 pm Leave a comment


Calendar

August 2016
S M T W T F S
 123456
78910111213
14151617181920
21222324252627
28293031  

Posts by Month

Posts by Category